The sprung idler that presses the filament against the drive gear, turning on a 5 × 12 shaft in two 625 bearings, on the Original Prusa MINI+. 26.4 × 58.4 × 12.5 mm, 3D printed. From Prusa Research's own CAD of the printer, published under the GPL.
- Made by
- Prusa Research
- Kind
- 3D model
- Licence
- GPL 3.0 or later
- Keywords
- prusa, prusa mini, mini+, 3d printer, original prusa, extruder, idler
| Overall size (X × Y × Z) | 26.5 × 58.5 × 12.5 mm |
|---|---|
| Type | 3D-printed printer part |
| Printer | Original Prusa MINI+ |
It prints in one pose: on its side, Y +90°. The app measures each at the values set: its size on the bed, first layer, overhang to bridge or support, and PLA.
