The print head's carriage; it rides the two X rods on an LM8UU each and carries the hotend, its fans and the probe, on the Original Prusa MINI+. 69.4 × 29 × 31.4 mm, 3D printed. From Prusa Research's own CAD of the printer, published under the GPL.
- Made by
- Prusa Research
- Kind
- 3D model
- Licence
- GPL 3.0 or later
- Keywords
- prusa, prusa mini, mini+, 3d printer, original prusa, carriage
| Overall size (X × Y × Z) | 69.4 × 29 × 31.4 mm |
|---|---|
| Type | 3D-printed printer part |
| Printer | Original Prusa MINI+ |
It prints in one pose: Y +90°, then Z +270°. The app measures each at the values set: its size on the bed, first layer, overhang to bridge or support, and PLA.
