Technic Panel Curved 11 × 3 with 2 Pin Holes Through Panel Surface (62531)

LEGO's Technic Panel Curved 11 × 3 with 2 Pin Holes through Panel Surface, part 62531, modelled after LDraw's drawing: a 1.2 mm shell whose outer face is a quarter of an ellipse 30.9 by 26.2 mm, with a 1 mm lip along its top; a foot beneath it with five pin holes up through it, hollow between them; a back wall with a window over each foot hole, solid between them round a pocket that rises from below between foot tubes leaning into it; a pin hole down its length at each end of its foot and its top; and two pin holes through its face near the ends, each in a notch in the face. Every pin hole takes a Technic pin.

One of the LEGO Technic Panel family.