A 5 mm printed plate that puts a Pololu motor bracket on the 10 mm grid: M3 clearance holes on the grid down both long edges screw it to a plate or block, and tapped M3 holes in the middle sit under the chosen bracket's own base holes, so the bracket screws down onto it.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC BY-SA 4.0
- Keywords
- adapter, adapter plate, bracket adapter, motor bracket, motor mount, pololu, 37d, 25d, 20d, gearmotor, l-bracket, m3
| Overall size (X × Y × Z) | 60 × 60 × 5 mm |
|---|---|
| Volume | 17.1 cm³ |
It prints in one pose: as modelled. The app measures each at the values set: its size on the bed, first layer, overhang to bridge or support, and PLA.
