A printed wheel that presses straight onto the double-flat 5.4 mm output shaft of the yellow TT gearmotor: a 10 mm wide disc 40 to 80 mm across, 60 by default, with a blind double-D bore 6.5 mm deep in its inner face, 5.5 mm round and 3.8 mm across the flats. The TT's shaft stands 9 mm out of its gearbox, so the wheel seats to the bottom of its bore 2.5 mm off the gearbox, clear of the 2 mm locating peg on one side. Two of them on a pair of TT motors make a robot's drive wheels.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC BY-SA 4.0
- Keywords
- wheel, tt wheel, tt motor, tt motor wheel, gearmotor wheel, robot wheel, drive wheel, robot car, double d, d-shaft, 5.4 mm, 3d printed
| Overall size (X × Y × Z) | 60 × 60 × 10 mm |
|---|---|
| Volume | 28.1 cm³ |
It prints in one pose: as modelled. The app measures each at the values set: its size on the bed, first layer, overhang to bridge or support, and PLA.
