Lincoln Memorial (LEGO 21022)
by ReDo.Bricks (@ReDo.Bricks)
Description
LEGO Architecture set 21022, the Lincoln Memorial in Washington, built in ReDo from LEGO System parts by their part numbers: 273 pieces, each one the real part in its real colour, studs clicked into the pieces above as the set is built.
## Where it comes from
Each piece is placed where the LDraw community's model of the set puts it: *21022 - Lincoln Memorial* by Damien Roux [Darats], from LDraw's Official Model Repository, redistributable under CCAL 2.0 (CC BY 2.0). The parts are ReDo's own parametric LEGO parts, not LEGO's CAD.
## What is different from the box
- The 5 old 1 × 2 jumper plates (3794a) are the current jumper, 15573, which has the same outside.
- Each column is a bar down an open round 1 × 1 plate, its end on the stud below; ReDo's studs stand 0.2 mm taller than LDraw's, so the bars sit 0.2 mm higher.
- The parts leave out what does not change how they fit: the groove along a tile's bottom edge, the ridges inside a brick's walls, the hollow in a stud's top.
## Try it
Lift the roof off, as the set's comes off, to see Lincoln's microfigure standing in the hall between the columns. Select any piece to see its part number, or change its colour.
Bill of materials
- 4 × Plate 2 × 12
- 16 × Tile 1 × 2
- 8 × Tile 1 × 4
- 4 × Tile 1 × 8
- 4 × Plate 2 × 10
- 4 × Tile 2 × 4
- 11 × Tile 1 × 6
- 12 × Plate 1 × 2
- 14 × Plate 1 × 4
- 3 × Slope 30° 1 × 2 × 2/3
- 2 × Plate 6 × 8
- 85 × Plate Round 1 × 1 with Open Stud
- 46 × Bar 3L
- 2 × Brick 1 × 10
- 6 × Brick 1 × 4
- 2 × Plate 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
- 4 × Plate 1 × 8
- 13 × Plate 1 × 3
- 1 × Plate 2 × 3
- 1 × Microfigure
- 3 × Tile 1 × 1
- 2 × Panel 1 × 1 × 1 Corner
- 2 × Brick 1 × 4 with 4 Studs on One Side
- 4 × Plate 2 × 8
- 2 × Plate 2 × 4
- 4 × Panel 2 × 2 × 1 Corner
- 12 × Slope 30° 1 × 1 × 2/3 (Cheese Slope)
- 2 × Panel 1 × 4 × 1 with Rounded Corners [Thin Wall]
Licences
- LEGO Plate: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Tile: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Slope: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Round Plate: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Bar: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Brick: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Jumper Plate: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Brick with Side Studs: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF