Brick House with Garden Terrace
by ReDo.Toys (@ReDo.Toys)
Description
A small brick house with a stepped red roof and a raised garden terrace, built only from LEGO System bricks, plates and tiles. It is a showcase for the instruction book: the walls are built in place on the baseplate, then the roof and the terrace are each built on the table and put on whole.
## How it is built
- **The walls** stand on a 16 × 24 baseplate: ten courses of 1-stud bricks with a front door, windows on every side, a balcony door and a partition wall inside. A brick with two studs on its side sits in the east wall.
- **The roof** rests on the top course by four corner plates only, so it is lifted off in one piece. An eave ring, six stepped layers of plates and a chimney are built on top of them.
- **The garden terrace** hangs on that side-stud brick by a bracket and is slid on from the side. A two-layer deck of plates carries a fence, a hedge, flower beds, a table and stools.
## Build it
1. Build the walls on the baseplate, course by course.
2. Build the terrace on the table and slide it onto the two side studs of the east wall.
3. Build the roof on the table and lower it onto the four corner posts.
Bill of materials
- 1 × LEGO Baseplate [16 studs, 22 studs]
- 50 × LEGO System Brick [1 stud, 4 studs]
- 74 × LEGO System Brick [1 stud, 3 studs]
- 61 × LEGO System Brick [1 stud, 2 studs]
- 12 × LEGO System Brick [1 stud, 6 studs]
- 8 × LEGO System Brick [1 stud, 1 stud]
- 2 × LEGO System Brick [1 stud, 10 studs]
- 1 × LEGO Technic Ball Joint [on a 2 x 2 brick with an axle hole]
- 4 × LEGO System Plate [1 stud, 2 studs]
- 6 × LEGO System Plate [1 stud, 10 studs]
- 21 × LEGO System Plate [2 studs, 4 studs]
- 16 × LEGO System Plate [2 studs, 6 studs]
- 30 × LEGO System Plate [2 studs, 3 studs]
- 6 × LEGO System Plate [2 studs, 8 studs]
- 16 × LEGO System Plate [2 studs, 2 studs]
- 9 × LEGO System Brick [2 studs, 2 studs]
- 1 × LEGO Baseplate [16 studs, 16 studs]
- 1 × LEGO Technic Ball Joint [socket on a 2 x 2 brick, narrow]
- 2 × LEGO System Plate [4 studs, 8 studs]
- 1 × LEGO System Tile [4 studs, 4 studs]
- 4 × LEGO Round Brick [1 stud, open stud]
- 20 × LEGO Round Plate [1 stud, plain]
- 4 × LEGO Fence [on the end cells]
- 5 × LEGO System Brick [1 stud, 8 studs]
- 2 × LEGO Round Plate [2 studs]
Licences
- LEGO Plate: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Brick: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Technic Ball Joint: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Technic Ball Socket: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Tile: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Round Brick: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Round Plate: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF
- Spindled Fence: CC BY-SA 4.0, credit ReDo.Pro. Downloads: STEP, STL and 3MF