The stainless heatbreak of the Original Prusa MINI+'s hotend: a 5.5 mm tube 32 mm long, threaded M6 for its last 6 mm into the heater block, bored 4.1 mm for the PTFE liner down to a 2 mm throat. Modelled from Prusa Research's drawing.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC BY-SA 4.0
- Keywords
- prusa, prusa mini, mini+, hotend, 3d printer, extruder, heatbreak, heat break, throat, m6, ptfe
| Overall size (X × Y × Z) | 6 × 6 × 32 mm |
|---|---|
| Volume | 420 mm³ |
| Length | 32 mm |
| Printer | Original Prusa MINI+ |
| Thread | M6 |
| Tube | 5.5 |
