The aluminium heater block of the Original Prusa MINI+'s hotend, 22 × 16 × 11 mm: tapped M6 through for the heatbreak and nozzle, a 6 mm bore for the heater cartridge that an M3 screw clamps across its slit, and a 3.1 mm bore for the thermistor held by an M3 grub screw. Modelled from Prusa Research's drawing.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC BY-SA 4.0
- Keywords
- prusa, prusa mini, mini+, hotend, 3d printer, extruder, heater block, heaterblock, heat block, m6, heater cartridge, thermistor
| Overall size (X × Y × Z) | 22 × 16 × 11 mm |
|---|---|
| Volume | 2.6 cm³ |
| Heater | 6 |
| Printer | Original Prusa MINI+ |
| Thermistor | 3.1 |
| Thread | M6 |
