CyberBrick's 030 motor fitted with its gear reducer, as the vendor draws the pair: the motor stands on its solder tabs with the 22 × 26 mm gearbox above it. The output is a double-D shaft out of one face — Ø5.3 mm with flats 3.6 mm apart, standing 8 mm proud — bored 2 mm down its centre so an axle can be pressed in instead. Each side of the housing carries a shallow vertical groove, 4 mm wide, and no hole runs through it. The SH1.0 lead the vendor draws is left off.

One of the Plastic Gearmotor family.

Made by

CyberBrick

Kind

3D model

Licence

LicenseRef-CyberBrick-CAD

Keywords

cyberbrick, la024-reducer, motor, dc motor, 030, gearmotor, reducer, gearbox, sh1.0, gear motor, geared motor