CyberBrick's single or double servo arm, drawn so its arms can be cut short: a 7.26 mm hub on a 4.9 mm spline bore with a 2.5 mm screw hole, and arms 4 mm wide and 1.55 mm thick with 1 mm holes every 2 mm. Length is where the arms are cut, measured from the centre; 16.05 is the arm as it comes. Cut to fit the pocket of a Spur Gear with the servo horn bore: 4 mm for 12 teeth, 6.5 for 16, 9 for 20, 11.5 for 24 and 14 for 28, then glue it in.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC BY-SA 4.0
- Keywords
- servo, horn, arm, cut, cyberbrick, spur gear, glue
| Overall size (X × Y × Z) | 32.1 × 7.3 × 4.2 mm |
|---|---|
| Volume | 253 mm³ |
