9g Servo Motor with Clutch Protection, Ears Cut Off

CyberBrick's 9 g micro servo with a slipping clutch on its output: a 22.5 × 12 mm body and a 4.7 mm splined output on the Z axis, with its two mounting ears cut off flush with the case, ready for a printed case that holds it by its body. The lead the vendor draws is cut where the ears were, so the three wires show where they leave the case and the app can run the cable instead.

One of the Micro Servo family.

Made by
CyberBrick
Kind
3D model
Licence
LicenseRef-CyberBrick-CAD
Keywords
cyberbrick, pg001, servo, 9g, micro servo, clutch, actuator, no ears, ears cut, earless, rc servo
Overall size (X × Y × Z)27.7 × 12 × 30.8 mm
Typemicro servo
ModelPG001
Supply voltage4.8-6 V
Current50 mA no-load, 550 mA stall at 4.8 V; 60 mA no-load, 650 mA stall at 6 V
Torque1.0 kg-cm stall at 4.8 V, 1.2 kg-cm stall at 6 V
Speed0.14 s/60° at 4.8 V, 0.12 s/60° at 6 V
Rotation180° + 10°

    Variations