The 20 × 20 × 2.5 mm lid that closes the back of the Micro Gearmotor Case over the motor's terminals. Two countersunk M3 screws at opposite corners hold it flush, threading into the case's back, and a 5 mm notch in one edge lets the motor's two wires out.
- Made by
ReDo.Pro- Kind
- Parametric part
- Licence
- CC-BY-SA-4.0
- Keywords
- lid, cover, case, motor case, n20, micro metal gearmotor, 3d printed, m3, countersunk
| Overall size (X × Y × Z) | 20 × 20 × 2.5 mm |
|---|---|
| Volume | 826 mm³ |
It prints in one pose: as modelled. The app measures each at the values set: its size on the bed, first layer, overhang to bridge or support, and PLA.
